Itho Daalderop WPU 5G 25 c, Руководство пользователя

Страница: 29 / 50

Manually enable mode 1, 2, or 3
It is possible to manually opt for mode 1, 2 or 3 during
auto-ventilation (see
Standard ventilation on page 27
).
a) Activate the thermostat.
b) Choose the ventilation mode by pressing the button
1 ,
2 or 3 briefly.
c) Your choice is confirmed by the appearance of a
white ring in button
1 , 2 or 3 .
The Auto-ventilation mode is now turned off.
The Auto-ventilation mode must be manually switched back
on!
Turn auto-ventilation again
If manually chosen for the mode 1, 2 or 3 will also have to
be manually switched back to Auto-ventilation.
a) Activate the thermostat.
b) Choose automatic mode by pressing the
AUTO button
briefly.
c) On the screen, the active position is shown by means
of a white ring in the
AUTO button.
The Auto-ventilation mode is switched back on.
7.5. Timer
Timer, position 1
10 minutes high position
Timer, position 2
20 minutes high position
Timer, position 3
30 minutes high position
It is possible to switch the ventilation unit to the highest
position via the thermostat for 10, 20 or 30 minutes.
- Timer for switching the unit to high speed for a
period of time that can be adjusted.
After the set time period has expired, the ventilation unit
switches back to Auto-ventilation or the last chosen
position before the timer is switched on, unless this is the
high setting. In that case, the ventilation unit switches to
the medium or low setting depending on which one was
chosen last.
a) Activate the thermostat.
b) By pressing the
TIMER button several times, the
different positions will appear.
c) Choose the correct position.
d) Your choice is confirmed by the appearance of a
white ring in the TIMER button.
The timer can be interrupted at any time by pressing the
low setting, medium setting, high setting or auto-ventilation
button.
29