Itho Daalderop WPU 5G 25 c, Руководство пользователя

Страница: 19 / 50

5.2. Increase/reduce temperature
Setting the desired temperature once will suffice for a
pleasant indoor climate. The heat pump will heat or cool
the home based on the set temperature and the season.
The heat pump works at its most economical at a
constant temperature. Lowering the temperature during
the night takes additional energy in a well-insulated
home. Lowering the temperature during the night is
therefore not recommended.
Increase
Reduce
Room temperature
Desired temperature
Changing temperature during
heating
Changing temperature during
cooling
The temperature can be adjusted as follows:
a) Activate the thermostat.
The 'large' white numbers reflect the current room
temperature. The 'small' grey numbers reflect the
desired temperature.
b) By pressing the INCREASE or REDUCE button, the
desired temperature can be increased or reduced by
0.5°C.
The HEATING or COOLING symbol will flash during the
change in temperature.
5.3. Settings heating/cooling
Temperature
The following (temporary) settings can be selected for the
heating or cooling of the home.
Description
Automatic heating/
cooling
Thermostat enabled.
Electric heating
(1)
Electric additional heating of
the home.
Stand-by
Thermostat switched off.
1) Option only visible if the heat pump is equipped with an electric
heating element.
Selecting setting
a) Activate the thermostat.
b) Press the
TEMPERATURE button for about 3 seconds
until the current setting is displayed flashing on the
screen.
c) By pressing the TEMPERATURE button multiple
times, the various settings are displayed.
Automatic heating/cooling
Electric heating
Stand-by
d) Select the correct setting.
e) Confirm the choice by pressing the
LOGO . The
selected setting is displayed for 3 seconds.
If the choice is not confirmed within ten seconds, then the
change will be cancelled and the thermostat will return to
operating status.
f) After which the thermostat will automatically return
to the operating status.
19