Itho Daalderop Smartboiler Mono, Инструкция по установке и использованию

Страница: 23 / 38

4.8.3. SERVICE service menu
The following settings can be adjusted in the SERVICE service
menu:
Symbol Unit Description Min. Max. Step Setting
TMAX °C
Maximum heater temperature during
SMART CONTROL.
65 80 5 80
TMIN °C
Minimum heater temperature during
SMART CONTROL.
55 60 1 55
ERROR RESET
Resetting the appliance during or after
error resolution.
0 1 1 0
0
ERROR
RESET selection; example
●
The LED indicator is continuously lit in yellow.
●
Pressing the Back button returns the screen to the previous
menu.
●
Adjust the settings:
- Select the setting to be adjusted by pressing the OK button.
The LED indicator flashes yellow rapidly.
- Adjust the setting using the Increase or Lower button.
- Confirm the change by pressing the OK button.
- Cancel the change by pressing the Back button.
●
If no operation is performed for 30 seconds, the heater returns
to the operational status and the screen is disabled.
Tip
An ERROR RESET can also be performed during error
notification in the operational status by pressing the Back button
for approximately five seconds.
Tmax - Max. heater temperature SMART
The maximum water temperature during SMART CONTROL.
Min. 65°C | Max. 80°C | +/- 5°C.
●
80°C [standard setting]
Tmin - Min. heater temperature SMART
The minimum water temperature during SMART CONTROL.
Min. 55°C | Max. 60°C | +/- 1°C.
●
55°C [standard setting]
ERROR - Reset appliance error
Reset settings:
●
0 = NO [standard setting]
The reset is cancelled.
●
1 = RESET
Remove the heater's error message by resetting the appliance.
An ERROR RESET of the appliance means that:
●
The error message history is deleted;
●
The heater restarts in STANDBY mode. Go to the
CONFIGURATION settings to change the heater mode to ON.
23