iTero Element 5D Plus Скачать руководство пользователя страница 55

Страница: 55 / 208

Learning Center:

Tap to access training materials and educational videos for

the iTero scanner.

Lock:

Tap to log out of your account whenever the scanner is not in use, as

described in section 3.2. This helps ensure that the dental practice is HIPAA
compliant and that all medical information is secure.

Tip:

You should lock the system while cleaning it, in order to avoid unintended

entries.

Settings:

Tap to adjust the scanner preferences, for example, for wand

configuration, localization, user settings, and more. For more information, see
section 3.6.

Help:

Tap to display a translucent Help overlay with hints to aid in the navigation

of features and tools.

Figure 42: Help overlay

In this view, the button changes to two additional buttons:

Tap for remote assistance from Customer Support. Customer Support is
available from every Help overlay.

Note:

Please call Customer Support before trying to connect remotely.

iTero Element® 5D Plus User manual

Содержание Element 5D Plus





































































































































































































Результаты поиска

Содержание Element 5D Plus

Отзывы:

iTero Element 5D Plus, Руководство пользователя, Страница: 55 / 208

Результаты поиска

Содержание Element 5D Plus

Отзывы: