item Controller BL 1-04 /C
― Product manual
64
In case of non-EMC-compliant wiring of the servo drive and motor, compensating electric current may flow via the connected
computer and the USB interface. This may lead to communication problems.
To avoid this, we recommend using an electrically isolated USB adapter "Delock USB Isolator" (type 62588 by Delock) or a
comparable adapter.
Configuration on the device [X19]
USB connector (female), type B
Mating connector [X19]
USB connector (male), type B
Pin assignment USB [X19]
Interface cable for the USB interface, 4 cores, shielded and twisted (type B).
2
1
3
4
Figure 28: Pin assignment of the USB connector
Pin
Name
Specification
1
2
D-
Data -
3
D+
Data +
4
GND
GND
9.8 Connector: standard Ethernet [X18]
The BL 1-04 /C servo drive has a network connector of the RJ45 type.
Configuration on the device [X18]
Female RJ45 connector, cat. 6
Mating connector [X18]
Male RJ45 connector
Pin assignment of the network connector [X18]
