Itel STL-SAT Changeover, Руководство пользователя

Страница: 54 / 57

54 STL-SAT Changeover
© 2018 ITEL SNC
4.1.6 MAN
sets the exchange in manual mode.
The main channel will be aired and the exchange logic blocked. Under these conditions, automatic
switching to the backup channel will never occur.
Syntax
MAN
For more information on how to exchange, refer to the description of the AUTO command.
4.1.7 MUTE
temporarily releases audio output in mute mode or resumes normal operation.
After the specified period, or after a MUTE 0 message, the device will automatically resume normal
operation.
Syntax
MUTE <spazio> 0..255 :puts the device in silence mode for a time between 0 and 255 seconds
MUTE <spazio> 0 :immediately release the device from the mute state.
4.1.8 NOQUIET
activates the sending of alarms to the number that sent the message
Syntax
NOQUIET
The device will resume sending alarm messages to the number that gave the command.
4.1.9 NUMBERS
requires the list of internal numbers for the device
Syntax
NUMBERS
The apparatus responds with the list of numbers and their status
Currently Stored numbers
+39335123456-DQ
+39123456789-Q
+39876543213-
EMPTY
the first number is both disabled (D) and in "quiet" (Q) state, can not send commands or require the
status and alarms will not be sent to this.
The second number is in "quiet" state, so it can send commands and request status, but no alarms will be
sent to this.
The third number has no active restrictions, so you will receive alerts and send commands and status
requests