Itel STL-SAT Changeover, Руководство пользователя

Страница: 18 / 57

18 STL-SAT Changeover
© 2018 ITEL SNC
2.3.2 Radiotext Indications
In the second sub-menu of the RDS Encoder are shown the strings related to internally programmed
radiotext.
Radiotext:
this is a very long
Radiotext:
radiotext to show it
Radiotext:
scrolling
It indicates if the encoder is running then enabled for transmitting the Radiotext and radiotext currently
transmitted.
Note: As the radiotext string is longer than the display, it will be displayed for 20 character blocks each. The
resulting animation is not present on the actually streamed string. An example is shown in the images.
As with the PS, the internal Radiotext is aired and displayed on the display when the unit is not in 'override AF
tables' mode.
If this mode is selected, the radiotext will be transmitted, if present, of the incoming MPX signal and
"OVERRIDE MODE" will be displayed on the display.
2.4 Changeover
The third available menu is Changeover, which defines the modes of exchange, parameter setting, timing
and intensity thresholds.
2.4.1 Set Up main channel and back up
In the first changeover submenu, you can set the main (Main) and Back (Main) channels, each of which
can be selected from:
STE: Stereo-encoded L / R audio input, internally generated RDS
MON: L / R audio input, internally generated RDS
MPX: External MPX input, RDS generated internally if an incoming RDS signal is not available.
FILT: External MPX input eliminating the RDS sub-carrier.
this mode is selected if you want to complete the RDS block replacement on the incoming MPX signal or
replace the AF tables only.
The current channel is also provided