Itel DPRO3, Руководство пользователя

Страница: 12 / 59

12 DPRO3 FM Audio Processor
© 2016 ITEL Elettronica e Telecominicazioni Snc
following the editing rules described before. When name editing is finished, the "*" cursor will be
positioned to the right side of the name string and will allow to move on the other editable elements
on the window.
Once the preset name has been edited, you can choose an user file to store it, then go to "SAVE"
button which will start to flash. Pressing now the knob will result in saving the preset to the specified
user file.
2.1.5 Gate level and compressor drive
Gate: the gate threshold is the level below which the release time is greatly increased, still allowing
for a slow recovery of the volume but avoiding to amplify any background noise during short breaks.
The indication "GATED" is visible if the input level is below the threshold.
Drive: indicates the compressor/limiter driving level, thus determining the compression level.
A high level of compression will produce a steady and dense sound, while a lower level will result in
a more natural and dynamic sound.
Adjust the drive control to have a compression of approximately 15 dB (which is not critical) as it will
accomodate for most musical genres.
Input HPF (ON/OFF): enables / disables the 30Hz high pass filter for infrasonic component
reduction.
2.1.5.1 Bypass
If the selected process is "F00: BYPASS", the only editable parameter will be the input level and the
bar will indicate the clipping level.
No other parameter is used, so the other editing windows will be hidden.
2.1.6 Compression level and master release time
Compression: sets the tradeoff between clipping and compression limiting.
Reducing this value, you will get a louder sound at the expense of more distortion, on the contrary,
raising the compression level will result in a quieter but cleaner sound.
Release: sets the compessor release time. Shorter times will raise the perceived loudness but