iTegno 39 series Скачать руководство пользователя страница 132

Страница: 132 / 278

iTegno 39XX GPRS Modem

AT Commands Guide

02000C17

•

v1.5

Confidential

All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this

Connections Pte Ltd

122

8.15

Set Reporting Call XCALLSTAT

This command allows enabling / disabling the reporting voice call status on DTE using an unsolicited result

code +XCALLSTAT: <call_id><stat>. This code may be repeated so that for each call one line is displayed on DTE

(e.g. one call is active and one call is waiting, or up to 6 calls are active in a multiparty session).

The unsolicited result code is sent not only for voice calls managed by the AT interface, but also for the voice

calls established by another SW block e.g.MI.

•

Set command is used to enable/disable the XCALLSTAT.

•

Read command returns the current XCALLSTAT value.

•

Test command returns supported values.

Syntax

: AT+XCALLSTAT=< enable>

Command

Possible Responses

Execute command

AT+XCALLSTAT=1

CME ERROR: <error>

Read command

AT+XCALLSTAT?

+XCALLSTAT: <enable>

Test command

AT+XCALLSTAT=?

+XCALLSTAT: (list of supported <enable>’s)

Defiined values

<enable> may be

reporting disabled

reporting enabled

<call_id> indicates the call identification (GSM02.30 4.5.5.1)

<stat> indicates the voice call status as follows

active

hold

dialling (MO call)

alerting (MO call; ringing for the remote party)

ringing (MT call)

waiting (MT call)

Содержание 39 series























































































































































































































































































Результаты поиска

Содержание 39 series

Отзывы:

Бренды по названию

Популярные бренды

iTegno 39 series, Руководство по командам

Результаты поиска

Содержание 39 series

Отзывы:

Бренды по названию

Популярные бренды