![ITech IT9120 Series Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/itech/it9120-series/it9120-series_programming-manual_2095311021.webp)
Status Register Commands
Copyright © Itech Electronic Co., Ltd.
10
Query syntax
STATus:QUEStionable:ENABle?
Returnded value
<NR1>
Related command
*PSC
Bit 0
Voltage summary questionable
Bit 1
Current summary questionable
Bit 5
Frequency questionable
Bit 7
Sync questionable (lost sync)
Bit 8
PLL source questionable (lost pll)
STATus:QUEStionable:NTRansition
This command set the value of the Questionable NTR(Negative-Transition)
register.The register serve as polarity filters between the Questionable
Condition and Questionable Event registers to cause the following actions.
When a bit of Questionable NTR register is set to 1,then a 1-to-0 transition of
the corresponding bit of the Questionable Condition register causes that bit in
the Questionable Event register to be set.
Command syntax
STATus:QUEStionable:NTRansition <NR1>
Parameters
0
~
65535
Example
STATus:QUEStionable:NTRansition 128
Query syntax
STATus:QUEStionable:NTRansition?
STATus: QUEStionable:PTRansition
This command set the value of the Questionable PTR(Positive-Transition)
register.The register serve as polarity filters between the Questionable
Condition and Questionable Event registers to cause the following actions.
When a bit of Questionable PTR register is set to 1,then a 1-to-0 transition of
the corresponding bit of the Questionable Condition register causes that bit in
the Questionable Event register to be set.
Command syntax
STATus:QUEStionable:PTRansition <NR1>
Parameters:
0
~
65535