3030 Corporate Grove Dr • Hudsonville • MI • 49426
Phone: 616-396-1355 • www.itc-us.com • [email protected] • DOC#: 710-00184 • Rev A: 01.26.21
Closet Light Install Instructions
(Part #: TPR08-72 & TPR12KK-LLLWL-8)
SAFETY INSTRUCTIONS
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not install any luminaire assembly closer than 6” from any combustible materials.
• Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
For warranty information please visit www.itc-us.com
1.
Determine the installation location and staple or screw channel in
place. If screwing the channel in place, pre-drill holes to prevent
the channel from cracking or warping.
PARTS / TOOLS NEEDED:
Closet Light Channel
TPR Tape Light
Power Drill or Staple Gun
#4 Mounting Screws
(optional)
Butt Splice Connectors
(not provided)
2.
Press the tape light into the channel making sure not to pinch or
sharply bend the light. If additional securement is needed, the
paper backing can be removed from the light and it can be
taped into the channel.
3.
Follow the wiring diagram to wire the light to your system.
INSTALLATION CONSIDERATIONS
•Do not bend lighting more than necessary. It should only be bent to a 1” radius. Bending to a tight 90
◦
angle could cause damage
to the circuit.
•Only bend the LED ribbon in one natural direction, do not try to bend in an unnatural direction such as twisting.
•Cannot be used with ITC’s FlexConnex
™
product.
•The channel is designed for interior installation only and is not rated for UV exposure.
Tape Light
To 12V DC
Power
Black (-)
Red (+)
Black (-)
Fuse
