ITC HEMOCHRON Signature Elite страница 17 Скачать руководство пользователя

Страница: 17 / 84

Configuring Display Brightness, Contrast, and Illumination

The brightness and contrast of the display can be adjusted and the length of time that the display remains
illuminated after a test is completed or a key is pressed can be set.

Press and hold

START

to turn on the instrument.

Press

(zero) to display the main menu.

Press

for the Configuration menu:

To Adjust the Display Contrast:

Display contrast can be set so characters are darker (more contrast) or lighter (less contrast).

Press

to display the Contrast menu:

Press

to decrease the contrast. Press

to increase the contrast.

Note

: Pressing and holding a key for more than one second will cause it to auto-repeat.

Press

ENTER

to save the new setting.

To Adjust the Display Brightness:

Display brightness can be set so the display background is darker or lighter.

Press

to display the Brightness menu:

Press

to decrease the brightness. Press

to increase the brightness.

Note

: Pressing and holding a key for more than one second will cause it to auto-repeat.

Press

ENTER

to save the new setting.

To Adjust the Length of Time the Display Remains Illuminated:

Press

to display the Flashlight menu:

Press

to decrease the length of time the display remains illuminated. Press

to increase the time.

Note

: Pressing and holding a key for more than one second will cause it to auto-repeat.

Note

: The factory default time for display illumination is five minutes. The maximum

illumination time is 100 minutes. To disable display illumination, set the time to zero (

Press

ENTER

to save the new setting.

Содержание HEMOCHRON Signature Elite





















































































Результаты поиска

Содержание HEMOCHRON Signature Elite

Отзывы:

Похожие инструкции для HEMOCHRON Signature Elite

Бренды по названию

Популярные бренды

ITC HEMOCHRON Signature Elite, Руководство оператора

Результаты поиска

Содержание HEMOCHRON Signature Elite

Отзывы:

Похожие инструкции для HEMOCHRON Signature Elite

Бренды по названию

Популярные бренды