F Series Fan Instructions
FL 107, FL107/90, FL 150, FL 204, FL 250, FL 325
Mounting Instructions
1.
Cut the mounting hole (as required) in the enclosure using the dimensions shown next page, respecting the
tolerances indicated.
2.
Insert the fan filter into the mounting hole. Note: the bottom side is marked by the logo plate down on the
right.
3.
Push on each corner of the cover so that the fan filter is correctly clamped.
Attention: Press on the fan filter up to the required depth so that the clips return to their original position.
Fix the fan filter using the clips provided or four screws in each corresponding hole within the corners of the
base.
