ITB ARCHIMEDE 5000 Series, Руководство пользователя

Страница: 16 / 65

Archimede 5000 series- FM Power Amplifiers
User’s manual – Page 16 of 65
5.2.a REMOTE connector
The REMOTE connector [14] gathers mainly information about the equipment status (alarms status and internally carried measures).
The following table describes these I/O signals:
Pin Signal Description/Notes
1
- (not connected)
2
High reflected power alarm If this status is reached, the output on this pin is +12V
DC
.
3 - (not connected)
4 Direct power measure Range from 0 to 2V
DC
(full range).
5 Reflected power measure Range from 0 to 2V
DC
(full range).
6
Low direct power alarm If this status is reached, the output on this pin is +12V
DC
.
7
Not connected (not connected)
8
DC power supply External 12 V
DC
for service purposes (20mA Max)
9
- (not connected)
10
Stand by To set the equipment in stand by mode connect this pin to pin 8 or to an ex12V
DC
.
11
Power adjustment input command Range from 0 to 4V
DC
(from 0W up to full output power).
12
Temperature alarm If this status is reached, the output on this pin is +8V
DC
.
13 - (not connected)
14 - (not connected)
15 - (not connected)
16 - -
17
- -
18
- -
19
- -
20
- -
21
- -
22
- -
23
- -
24 - -
25 - -