Itasca latitude 37G, Руководство пользователя

Страница: 32 / 135

SECTION 3 –
DRIVING YOUR MOTOR HOME
3-8
possible hazard to other motorists. When the
flashers are on, it serves as a warning to other
drivers.
See your chassis manual for instructions on
activating, operating, and canceling hazard
warning flashers.
NOTE: Move multi-function lever upward or
downward to cancel.
SIGNAL LEVER/HEADLIGHT
HI/LO BEAM
The signal lever controls the turn signals and
high/low beam changing.
Move multi-function lever upward for right turn
signal and downward for left turn signal. An
audible chime will alert you when the signals are
flashing.
Pull end of handle toward you to switch
headlight high/low beams.
MAP LIGHT SWITCH
Turn the map light on using the Panel Light
brightness thumbwheel control.
Roll it up towards “Cargo/Dome” until you
feel it click into the map light ‘on’ position.
See your chassis manual for further
information on this switch.
STEERING COLUMN
ADJUSTMENT
The tilt/telescope adjustment pedal is located
on the floor to the left of the steering column as
shown.
Adjust Steering Wheel or Column
Press the pedal down to adjust either the tilt or
telescope. Release the pedal when you have
adjusted the tilt angle or steering wheel distance
to your preferred position.
Turn Signals/Hi-Lo Beams
Press pedal to adjust steering
wheel tilt or telescope