Itamar Medical WatchPAT Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 58

Itamar Medical WatchPAT Скачать руководство пользователя страница 40

WatchPAT

™

ONE System

35

Operation Manual

5

PRODUCT HANDLING

This section should be read by the product provider.

The WatchPAT device has been designed and manufactured to meet reliability requirements
applicable to medical equipment. To ensure maximum durability of operation, the system
should be used and handled in strict compliance with the instructions provided in this Manual.

5.1

Battery

You may consider placing a new AAA Alkaline battery in the package before shipping to
patient.

5.2

Handling

Handle with care:



Use only the designated package for transportation



Store at room temperature, following the conditions on the label, and
avoid direct sun light



Do not expose the WatchPAT device to extreme temperature or
humidity conditions (such as storing in a car or bathroom)

5.3

Storing the WatchPAT device



The WatchPAT device should be stored in its original package at room
temperature and low humidity.



The battery should not be stored in the WatchPAT battery compartment during
shipment.

«
...
38
39
40
41
42
...
»

Содержание WatchPAT



























































Отзывы:

Нет отзывов