Italtherm CITY MAX 26 K, Инструкция по эксплуатации

Страница: 8 / 56

Green Heating Technology
8
8 Position on which the knob 12 should be positioned to turn the boiler off or to reset
a boiler block.
9 Position on which the knob 12 should be positioned to activate the boiler in Winter
mode (both Heating and Domestic Hot Water functions available)
(
attention:
only if the
Remote Control Kit is
not installed).
10
Scale on which the knob
12
should be positioned to adjust the Heating system tem-
perature
( attention: only if the Remote Control Kit is not installed).
11 Position on which the knob 12 should be positioned to activate the boiler in Summer
mode (only Domestic Hot Water function available and exclusion of Heating)
12 boiler
mode
Knob that allows to switch the boiler in OFF mode 8, Summer 11 or Win -
ter
9
and to adjust the Heating system temperature
10
.
If the Outdoor Sensor Kit is installed, see "Outdoor Sensor Kit" on page 51.
If the Remote Control Kit is installed, see "Remote Control Kit" on page 52.
13 DHW
Knob that allows to adjust the temperature of the water in the storage (along the
scale
14
). The use of the positions
15 and 16 is reserved to the technician.
14 Scale on which the knob 13 should be positioned to adjust the Domestic Hot Water
temperature in the storage.
15 service
Positions of the knob 13 which use is reserved to the technician.
Do not turn the knob 13 on these positions.
16
17 By turning the knob 13 on this position (
hot water stand-by
), the storage heating is
completely deactivated and "– –" is displayed . This allows a considerable gas saving,
especially in medium and long term periods in which the hot water availability is not
necessary. The storage anti-freeze function remains active. The anti-legionella func-
tion is disabled.
Commands on the lower side
18 System pressure gauge
19 System filling and pressure restoring cock
20
GAS cock
Commands outside the boiler
Externally the boiler, suitably positioned in the build-
ing (generally by the installer or by the electrician),
two devices that the user should access to, are present.
The presence and the characteristics of these devices
are prescribed by the regulation in force.
Two-pole switch: it is located usually close to the boiler and it's for electrically insulating the boiler itself
from the domestic mains power supply network.
00066_0
0
18 19
20