Italtherm CITY MAX 26 K, Инструкция по эксплуатации

Страница: 7 / 56

Green Heating Technology
7
User guide
The front control panel
1
green
Electrical Supply Indicator Light
Off - boiler not electrically supplied.
Blinking - boiler electrically supplied, but not active because the knob 12 is on .
On - boler active. Knob 12 on , or on along the scale .
Flashing with short pulses -
actuated for mistake, by the user, a
function reserved to
the technician . Rotate immediately the knob 13 back on the scale .
2
yellow
Burner Indicator Light
Off - the flame in the burner is off.
On - the flame in the burner is on.
3
red
Alarm Indicator Light
Off
- no problems detected.
Blinking or Flashing - see "Alarms - boiler block" on page 39.
Flashing with short flashes - the user has activated, by mistake, a function reserved to
the technician . Turn the knob 13 on the scale immediately.
4 service Indication, on the display, for the Technician, usually not displayed.
5 2-digit
number
on the
display
Normally it indicates, in °C, the measured temperature of the heating system flow or
of the DHW storage (when the relevant symbol 6 or 7 flashes).
During the adjustment of the heating system temperature (rotating the knob 12 along
the scale ) or domestic hot water (rotating the knob 13 along the scale ) it
shows the set value , in °C.
When the knob 13 is turned on 17 , it is displayed "– –".
6
-
on the
display
Usually, they are shown in fixed mode and they indicate that the boiler is ready to
supply heat to the relevant heating or DHW . When the boiler is in Summer
mode , the symbol is not shown.
They blink during the actual heat delivery, by the boiler, to the relevant system.
7
se
rv
ice
service
8
9
10
12 13
14
15
17
16
11
3
4
6
7
5
1
2
00056 00