Italjet Dragster 2022, Руководство по обслуживанию

Страница: 33 / 165

Steering Column
Inspection should be carried out after 1000km first, and then every 10000km.
The steering column bearing should be adjusted properly to make the steering handle
rotate flexibly and ensure safe driving. Too tight steering column will lead to inflexible
rotation of the steering handle. If the steering column is too loose, it will cause vibration
and damage the steering bearing. Check the steering column to make sure it does not
move. If there is any movement, the steering column should be adjusted in time.
Front Shock Absorber
Inspection should be carried out after 1000km first, and then every 10000km.
Check the shock absorber for oil leakage, scratches, or external surface damage. If any
parts are faulty, replace them immediately.
Rear Suspension
Inspection should be carried out every 10000km.
Check whether the rear shock absorber leaks oil and check whether the swing frame
moves. If any parts are faulty, replace them immediately.
Exhaust Pipe Bolts and Muffler Bolts
Tighten these bolts after 1000km first, and then every 10000km.
Tighten the exhaust pipe nuts
①
and muffler fixing bolts
②
, and tighten the muffler
fixing bolts
②
and exhaust pipe connecting nuts
①
to the specified torque.
Item Exhaust pipe connecting nuts Muffler fixing bolts
Torque
（
N ·m
）
23 23
Body Bolts and Nuts
Tighten them after 1000km first, and then every 5000km.
The following table lists the bolts and nuts for key parts, which must be of reliable quality
to ensure safety. If necessary, tighten with a torque wrench according to the specified
torque.
Item Torque
（
N ·m
）
Steering column nut 65
Front fork lower plate clamping bolt 33
Front axle bolts 65
Handle pipe clamping bolt 16
Caliper mounting bolt 26
Front brake disc mounting bolt 18
Rear brake disc mounting bolt 23
33