Italjet Dragster 2022, Руководство по обслуживанию

Страница: 19 / 165

- If filling is required, remove the tank cover (3) and
inject coolant from the hole (4) to check the level on the
tank (2).
- Once the level has been restored, reinstall the tank
cover (3) and tank observation cover (1).
Note: Coolant is corrosive. If there is any overflow
during filling, please carefully clean the parts in contact
with coolant.
Clean the Air Filter Element
- Remove the screw (1) and remove the air filter (2).
- Remove the filter element (3) from the air filter (2).
- Clean the filter element (3) with appropriate filter
element cleaning agent and make it completely dry.
Warning
Do not use gasoline or other flammable solvents to
clean the filter element.
- Check whether the filter element is worn or damaged,
and replace it if necessary.
- Apply the specific oil to the entyre surface of the filter
element (3) and then squeeze the filter to remove
excess oil.
- Reinstall the filter element (3) on the air filter, and
then replace the screen cover on the filter cover.
- Inspect the gasket (4) for good condition and replace it
in case of any damage.
19