isobus CCI A3, Руководство по эксплуатации

Страница: 19 / 32

3 Operation
17
3.5 Changing the grid
If you want to change the number and arrangement of the buttons, insert the
appropriate grid.
WARNING - GENERAL HAZARDS!
Do not change the grid during running.
During changeover of the grid, the CCI A3 logs off the ISOBUS and the con-
nection to the implement is interrupted.
→ Implement functions are no longer assigned to the buttons.
→
You can no longer operate the implement with the CCI A3.
Insert the grid, before you connect the implement .
NOTE
Grids are not implement-dependent.
Grids and implements can be freely combined.
1. Pull up the grid at the right and pull
out.
2. Select another grid.
3. Insert the two pegs on the grid into the
grooves in the casing of the CCI A3.
4. Fold the grid down.
→
The CCI A3 logs into the ISOBUS
again.