Ismart HMC-S3003, Руководство пользователя

Страница: 24 / 32

18
HALF-DUPLEX-1, HALF-DUPLEX-2
FULL-DUPLEX: RS422 full duplex mode,
connecting R + , R-, T + , T- interface of the
camera to control devices.
HALF-DUPLEX-1: RS485 half duplex mode,
in VISCA protocol, after executing the
command message, the camera does not
return confirmation / completion / error
messages.
HALF-DUPLEX-2: RS485 half duplex mode,
in VISCA protocol, after executing the
command message, the camera return
confirmation / completion / error messages.
Status
It displays current camera’s address, protocol,
baud rate, video format, mount mode and
software version number.
Restore Defaults
RESTORE DEFAULTS option is used to reset
all menus to default value. Press OK to
confirm or press

to cancel and return to
previous menu.
< RESTORE DEFAULTS>
PRESS OK CONFIRM
PRESS BACK CANCEL
BACK
< STATUS>
ADDRESS 1
PROTOCOL VISCA
BAUD RATE 9600
VIDEO FORMAT 1080
i
50
DVI-I OUTPUT YPBPR
MOUNT MODE STAND
FIRMWARE VER V1.2.5
SELECT BACK