Ismart HMC-S3003, Руководство пользователя

Страница: 23 / 32

17
Pan/Tilt/Zoom
PAN/TILT/ZOOM is used to change
pan/tilt/zoom value, available options:
PAN/TILT SPEED: 1, 2, 3, 4, 5, 6, 7, 8 the
bigger the number is, the faster the speed is.
The speed is the fastest when in 1x zoom
compared to other zooming times.
PAN/TILT LIMIT: ON/OFF, once it is set as
ON, below limit value can be set
UP: -30°~+90°, adjustable every 1°;
DOWN: -30°~+90°, adjustable every 1°;
LEFT: -170°~+170°, adjustable every 1°;
LIGHT: -170°~+170°, adjustable every 1°.
D-ZOOM LIMIT : X1, X2, X3, X4, X5, X6, X7,
X8, X9, X10, X11, X12.
PTZ TRIG AF: Turn ON / OFF the auto focus
when the camera pans / tilts / zooms.
POWER UP ACTION: PRESET 1, PRESET 2,
PRESET 3, PRESET 4, PRESET 5, PRESET
6, PRESET 7, PRESET 8, PRESET 9, HOME.
System
DISPLAY INFO: Turn ON / OFF display of
pan / tilt angle and prompt message.
RATIO SPEED: When RATIO SPEED is set as
ON
,
at telephoto zoom settings, the pan and tilt
speeds will be slower for a given amount of
joystick deflection then at wide zoom settings.
This keeps the image from moving too fast on
the monitor when there is a large amount of
zoom.
PRESET FREEZE:
When it is on, during a
regular preset call, the video will be frozen at
point A till Point B. At Point B, the video will be
displayed normally.
CVBS OUTPUT
：
LETTER BOX, CROP,
SQUEEZE.
LETTER BOX: add a blank area in the
upper and lower portion of the image to
display video in 16:9 ratio, so can show
without distortion in 4:3 ratio monitor.
CROP: cut the left and the right side of 16:9
ratio image to get 4:3 ratio image.
SQUEEZE: compress the video signal
horizontally to get 16:9 ratio image without
distortion.
RS422 PORT: FULL-DUPLEX,
<SYSTEM>
DISPLAY INFO OFF
RATIO SPEED ON
PRESET FREEZE OFF
CVBS OUTPUT SQUEEZE
RS422 PORT HALF-DUPLEX-1
SELECT BACK
<PAN TILT ZOOM>
PAN/TILT SPEED 8
PAN/TILT LIMIT ON
UP +90
DOWN -30
LEFT +170
RIGHT -170
D-ZOOM LIMIT X4
PTZ TRIG AF OFF
POWER UP ACTION HOME
SELECT BACK