background image

· DO NOT let children use the ismartgate product and app without adult supervision.
· ONLY Operate your ismartgate device when you are in clear view of your garage 

  or gate and you have verified that there are no objects obstructing the operation of 
  the door. ALWAYS wait for garage door or gate to be completely closed.

· NEVER operate the remote access feature of your ismartgate without ensuring that 
  there is an adult physically present in front of the door or gate validating that it is safe 
  to start the remote operation of your device.

Read instructions carefully before beginning

Please make sure your garage/gate is closed before you start installation.
The ismartgate device and our sensors are meant to be used with garage/gate operators equipped with 
photo-eye safety sensors. These sensors are normally found at the bottom of your garage/gate and avoid 
accidental  closing of your gate if an object or person is on the path of  the gate.

Always install your wireless magnetic sensors with your garage door or gate in a closed 
position.  

On sliding gates or garage doors part A should be mounted on the gate/garage door and part 

B should be mounted on the wall or fix part of the gate/garage. Please make sure you place the 

sensor on the side closer to the ismartgate device.

On swing gates, part B should be mounted on the gate that is closer to the ismartgate device. 

Part A should be placed on the other gate.

Wireless Magnetic Sensor installation guide

(iSG-GWS)

STEP 1 -  PLACE YOUR SENSORS ON A ROLLER DOOR OR GATE

TO PREVENT SERIOUS INJURY OR DEATH FROM  
MOVING GARAGE DOORS OR GATES:

A) Installation on a Roller Door

1. 

Place at the bottom of the roller door. 

Magnet in the door

 and sensor in a 

     fixed part. Make sure the magnet does not crash when the door rolls up.

2. 

Make sure the magnet is facing the right side of the sensor, where the

 

     

“Magnet” message is pointing out to.

3. 

Magnet and sensor must be less than 1.25 inches (3cm) apart.

Place this part on the gate 

/ garage door

Place this part 

on the wall

A

B

MUST BE LESS THAN 1.25 

INCHES (3CM) AWAY.

Содержание iSG-GWS

Страница 1: ... the path of the gate Always install your wireless magnetic sensors with your garage door or gate in a closed position On sliding gates or garage doors part A should be mounted on the gate garage door and part B should be mounted on the wall or fix part of the gate garage Please make sure you place the sensor on the side closer to the ismartgate device On swing gates part B should be mounted on th...

Страница 2: ...ic wireless sensors to your Sectional Door as per drawing below MAKE SURE THE GAP BETWEEN PART B AND PART A IS LESS THAN 1 25 INCH 3 CM MAKE SURE THE GAP BETWEEN PART B AND PART A IS LESS THAN 1 25 INCH 3 CM MAKE SURE THE GAP BETWEEN PART B AND PART A IS LESS THAN 1 25 INCH 3 CM PLACE THE SENSOR IN THE MIDDLE PART OF YOUR SLIDING GATE PLACE THE SENSOR IN THE MIDDLE PART OF YOUR SLIDING GATE A B A ...

Страница 3: ...oor CONFIGURATION section choose Wireless ISG GWS sensor type Finally scroll down and hit the Update button to finish sensor set up in the app STEP 2 PROGRAMMING SENSOR DURING ismartgate PRO LITE INSTALLATION WARNING If you are configuring the ismartgate for the first time with a wireless sensor please refer to our online manual which can be found in the following link https setup ismartgate com o...

Страница 4: ...nce will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect ...

Отзывы: