Manufacturer of Quality Air Conditioning and Heating Products • www.islandaire.com • sales@islandaire.com • (800)-886-2759
12
Dimensional drawings
Units must be installed in accordance with all applicable codes. Ensure there is adequate clearance for servicing and
proper operation. A minimum of 18 inches in front of the chassis is required. Provide additional space for service
technician to work on the unit. Ensure that drapes, bed, bedspread, furniture, etc. DO NOT block either return or
discharge air openings.
1”
6 1/8”
AIR FLOW
42”
24 15/16”
AIR FLOW
9 9/16”
AIR FLOW
1/2”
Top View
WALL SLEEVE
1” MIN. CLEARANCE TO
SIDE WALLS
FRONT DISCHARGE GRILLE
40 5/8”
3” MIN.
42”
ELECTRICAL KNOCKOUTS
SUBBASE
Front View
6 1/2”
16”
9 3/8”
23 1/8”
13 3/4”
Side View
RECOMMENDED
LOCATION FOR
GAS PIPING
(SEE PAGE 31)
Figure 1
Dimensional Drawings
