Operating Instructions for
Island Hopper Power Egg Pump 120V
Please read the operation instructions carefully before using this product.
Please operate in the correct way based on complete understanding.
HT-309 AC110-120V 60Hz 600W
*
*
*
*
*
Fault Inspection
Solution
Air pump
cannot be
switched on
normally
1. Power supply is not
properly installed
2. Overheated motor or
overload leads to motor
stop
1. Make sure the plug is properly connected
to the socket.
2. Allow natural cooling of the motor and then
restart.
3. If the problem still exits, please contact local
service agent or similar authorized personnel
for replacement.
1. Check whether the hose
is blocked or cracked
2. Connection between the
hose and the air pump or
the air bag is not properly
installed
1. Replace the hose or make it clear and
smooth. Check whether the hose is cracked
2. Reinstall the hose
3. If the problem still exits, please contact local
service agent or similar authorized personnel
for replacement.
Slow or abnormal
inflation
Manufacturer:
Dongguan Huatao Metal and Plastic Products Co., Ltd.
Manufacturer's address:
NO.2, Yanhe East Road, XiaBian Avenue, Chang'An Town,
Dongguan City , Guangdong Province, China
and Storage
8.
. Maintenance
After using and before moving away, servicing, maintaining or
adjusting this product, disconnect the power supply directly.
Please allow full cooling and ensure proper storage when not in use.
Please use it indoors
or in a covered area
to prevent direct sunlight
or rain.
Please store it in a dry and well-ventilated place.
9
.
Suggestions
The warranty period of the product is 1 year. It is recommended to
use the original spare parts. Any failure to satisfy this requirement
will not be covered by the warranty.
Contact the USA manufacturer
with any warranty concerns.
3135568
USA
Manufacturer:
Neoprene Distributors International / Island Hopper
Products
Manufacturer's address:
11859 Lakeshore North.
Auburn, CA 95602
530-268-7300
www.watertrampolines.com
7
. Fault Handling
