Installing the silicone buds
Page 3
Using the X1’s Travel Puck
Remove the existing silicone
earbud from the X1’s barrel
if necessary..
Insert the X1 into molded areas.
Place the X1’s audio plug into
the molded center area.
Install the replacement silicone
bud by placing it over the barrel
and pressing down until it is
securely fitted onto the barrel.
Gently wrap the cord around
to the back of the puck.
Verify that the silicone bud is
securely fitted onto the barrel
and does not come off.
Gently but snugly wrap the
cord around the inner-edge.
User’s Guide
iSkin and CERULEAN are trademarks of iSkin Inc.,
registered in Canada, the U.S. and other countries.
www.iSkin.com
Printed in China
