4-6 Getting Started
Chapter 4
Insert the Funnel Shield
The funnel shield can be placed at any time (before or after commissioning ). We
recommend, if the recorder is not pre-programmed, to adjust and fix the funnel shield
after all the programming and test work, e.g. with an adhesive point.
1.
Remove front cover.
2.
Insert funnel shield into pointer field.
Fig. 13: Insert funnel shield
3.
Check that the column pointer marks the right clocking column. Execute a
sample clocking and adjust the funnel shield centred to the clocking printed on
the time card and the column pointer.
The big right-angled opening left of the pointer field must not be covered!
Fix the funnel shield e.g. with an adhesive point.
4.
Set front cover again and close recorder.
