Appendix C
Keyboard commands C-3
E
approx. 2 sec.
Calls up time setting routine, the recorder is switched on.
commands in the time setting routine:
R
→
Selection of time and date.
E
→
Confirmation of selection and advancing.
Synchronisation of slave clocks in case of master clock
function:
R
→
Sending single impulses.
→
Entering time for slave clocks.
E
→
Confirmation and advancing.
Keyboard Commands on Error Messages
Key
Function
E
Er 10, Error on data transfer
→
Confirm with E, partial reset.
R
+
E
+
S
+
H
approx. 2 sec.
Complete reset, recorder is switched off.
→
All values in the recorder will be erased,
including date/time.
Controlling:
E
→
Confirmation and advancing at time and date.
R
→
Selection of date and time.
R
+
E
+
S
approx. 2 sec.
Partial reset, recorder is switched on.
→
Parameter values are set to default values, Card-No. 01.
Controlling:
E
→
Start partial reset.
E
+
H
approx. 2 sec.
Recorder test, recorder is switched off.
→
Test of display, printer and memory.
Controlling:
E
→
Start test mode.
