Chapter 7
Maintenance
7-3
Shift clocking downwards with "
E
" (-).
.
The distance between bottom line and
clocking is decreased.
Step width: 0,1 mm.
Example: Adjustment value 58 = clocking is
shifted 0,8 mm upwards.
4.
Insert time card and execute a sample clocking.
5.
Repeat steps 3 and 4 until clocking is printed in
correct position.
Press "
S
" to adjust the column change.
6.
D3
Adjust column change
Display = Adjustment value
50 = 0 mm, no correction
Value range:
00 - 99
Shift clocking to the right with "
R
"(+).
.
The distance between left card edge and
clocking is increased.
Shift clocking to the left with "
E
" (-).
.
The distance between left card edge and
clocking is decreased.
Step width: 0,1 mm.
Example: Adjustment value 41 = clocking is
shifted 0,9 mm to the left.
7.
Repeat adjustment and sample clocking until
the horizontal position of the clocking is correct.
Press "
S"
to quit adjustment routine.
Changing the Ribbon
To change the ribbon the programming panel has to be swung out. The column
pointer has to be moved to the park position.
Hint
The ribbon used in the unit is a special ribbon. If you want to
order further ribbons, please contact your local dealer or e-mail
us at:
Proceeding
