Isel DSH-S, Инструкция по сборке

Страница: 8 / 44

RDH-XS, RDH-S, RDH-M, DSH-S
8 / 44 April 2019
1.2 Proper use
The rotary units serve to rotate and position securely attached loads on the output flange in an environ-
ment where there is no danger of Exploded views and in accordance with the operational and environ-
mental conditions specified for this product. The product can be installed as required (in a horizontal,
vertical or diagonal position).
The rotary units are a partly completed machine (compare Article 2g in the MD 2006/42/EC). Here a
partly completed machine is defined as follows (quote):
'A partly completed machine is a unit which almost forms a machine but which cannot fulfil any specific
function on its own.
A drive system is a partly completed machine.
A partly completed machine is only intended to be installed into other machines or other partly completed
machines or equipment or joined together with these to form a machine as defined in this directive.'
The rotary units RDH - RSH are intended for installation into a machine or into other partly completed
machines.
The product should not be used to transport people.
Any other use than those described above is not considered correct and can lead to personal injuries
and damage to property.
1.3 Deliverables
The deliverables include:
Assembly instructions and installation explanation according to MD 2006/42/EC
Mounting materials
Accessories if required