11.4.3.
(Re)set SSH access
INFORMATION
INFORMATION
To protect your iCS system we strongly advice to change the standard factory password into a new
userdefined one. Keep this password secret!
For security reasons this is only possible with direct hardware access using the following procedure:
1)
Create a file RESET_SSH.txt with your new Root Passwort as content in the first line and save it to an USB flash memory
(FAT32 format). Note: if the file is emtpy, the iCS root password will be reset to factory default
2)
Plug the stick into iCS hardware and resboot iCS.
3)
The iCS changes the password during the boot process. In case of success the file will be renamed into
RESET_SSH.txt.done.
11.4.4.
iCS Factory Reset Invocation
In case the user has forgotten his password or simply wants to get back to factory default configuration, it is possible to invoke a
factory reset. For factory reset a USB flash drive (USB stick) with a FAT32/FAT16 partition is needed.
CAUTION!
CAUTION!
After factory reset all hardware configurations will get lost!
11.4.5.
Instructions
1)
Shut down all modules / devices and turn off the iCS System by unplugging mains.
2)
On the USB flash drive create an empty file called “RESET_ICS.txt”
3)
Plug USB flash drive into the USB slot at the front panel of the Crate-Controller
4)
Plug in mains
5)
Please wait about 20 seconds until iCS has started completely
6)
In case of success the file will be renamed to RESET_ICS.txt.done.
Crate Controller CC24/CC23 | Last change on: 14.04.2020 |
www.iseg-hv.com
27/44
