IGEP
TM
SMARC iMX6
Hardware Reference Manual
ISEE 2007 S.L. All rights reserved, IGEP is a registered trademark from ISEE 2007 S.L. The following is provided for informational purposes only.
NIF:ESB64377005 Document:
MAN-IGEP0046-001
/ Revision:
1.3
/ Date:
23/06/2016
35
4.20
SUPERVISOR
It is important to say that a supervisor is present in IGEP
TM
SMARC iMX6 sensing 1V8 signal.
4.21
ENVIRONMENTAL SPECIFICATION
Temperature Specification
General _Specification
Operating
Non-operating
Commercial grade
0ºC to +60ºC
-30ºC to +85ºC
Industrial grade (E2)
-40ºC to +85ºC
-40ºC to +85ºC
Table 24 Temperature Specification
Standard modules are available for industrial grade temperature range.
The operating temperature is the maximum measurable temperature on any spot on the module’s surface.
Humidity
o
93% relative Humidity at 40ºC, non-condensing (according to IEC 60068-2-78).
4.22
STANDARDS AND CERTIFICATIONS
RoHS
The IGEP
TM
SMARC iMX6 is compliant to the directive 2002/95/EC on the restriction of the use of certain
hazardous substances (RoHS) in electrical and electronic equipment.
CE marking
The IGEP
TM
SMARC iMX6 is CE marked according to Low Voltage Directive 2006/95/EC – Test standard
EN60950.
WEEE Directive
WEEE Directive 2002/96/EC is not applicable for Computer-on Modules.
Conformal Coating
Conformal Coating is available for Computer-on-Modules and for validated SMARC-314 modules. Please
contact your local sales or support for further details.