manualshive.com logo in svg

ISE 1-0002-003/100, Руководство по эксплуатации продукта

Поделиться
Скачать
ISE 1-0002-003/100 Скачать руководство пользователя страница 43

 

ise smart connect KNX Hue

 

Commissioning

 

 

 

Order No. 1-0002-003 

Product Manual Page 43 (60) 

 

 

6.6 

Transferring application programs and configuration data 

After programming the physical address, the application program, parameter settings and group ad-
dress connections can be transferred to the device.  
 
A connection to the device can be further established via IP or KNX for this purpose. 

  For this purpose, select 

Programming application program

. The download lasts approx. 15 sec-

onds with a direct IP connection or about 2 minutes if using TP. 

  After the download, please wait approx. 15 seconds while the device copies the data and in-

stalls the application. 

  Commissioning is complete. 

 

6.7 

Factory reset 

The following physical KNX address is factory pre-set: 15.15.255. 
Following the factory reset, the device behaves as in the state of delivery. The device is unconfigured. 
This can be recognized after starting up the device from the slowly flashing green APP LED (5). 
 

6.7.1 

Using the programming button on the device 

The device can be reset to the factory settings through a sequence during start-up. 

  Make sure that the device is switched off. 

  Press and hold programming button (1) and switch on the device. 

  Press and hold programming button (1) until the programming LED (4), the RUN LED (5) and 

the KNX LED (6) flash slowly simultaneously. 

  Briefly release the programming button (1), then press and hold it again until the programming 

LED (4), the RUN LED (5) and the KNX LED (6) flash quickly simultaneously. 

  The factory reset is being carried out; release programming button.  

  The device need not be restarted following a factory reset. 

 

The factory reset can be cancelled at any time by interrupting the sequence. 
 

6.7.2 

Using the website of the device 

The factory reset can also be triggered from the website of the device. 
 

  Call up the website of the device. For this purpose, double-click the icon of the device in the 

Other Devices

 area in the network environment. 

 

  Alternatively, you can also enter the IP address of the device in your browser. 

  Select 

Factory reset

 in the 

System

 menu. 

  Confirm the factory reset when the security prompt appears. 

  The next displayed page shows that the factory reset is being carried out. As soon as this is 

complete, the start page is loaded again. 

 

 

Содержание 1-0002-003/100





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды