ISE 1-0002-003/100, Руководство по эксплуатации продукта

Страница: 39 / 60

ise smart connect KNX Hue
Commissioning
Order No. 1-0002-003 Product Manual Page 39 (60)
6 Commissioning
6.1 Operation
Figure 6: ise smart connect KNX Hue.
1
Programming button for
KNX
Switches the device to the ETS programming mode or vice versa.
2
KNX connection (twisted
pair) On left: (+/red)
On right: (
–/black)
3
Connection for
power supply
DC 24 to 30 V, 2 W (at 24 V)
On left: (+/yellow)
On right: (
–/white)
4
KNX programming LED
(red) Red: Device is in ETS programming mode
5
LED APP (green)
Green: Normal operation
Off/
flashes: See 6.3.1 / 6.3.2
for start or diagnosis code
6
LED COM (yellow)
Yellow: Normal operation (brief dark phases indicate KNX telegram
traffic)
Off/
flashes: See 6.3.1 / 6.3.2
for start or diagnosis code
7
Ethernet connection
LED 10/100 speed
(green)
On:
100 Mbit/s
Off: 10 Mbit/s
LED link/ACT (orange)
On:
Connection to IP network
Off: No connection
flashes: Data reception on IP
8
MicroSD card holder No function