ise smart connect KNX Hue
Configuration
Order No. 1-0002-003
Product Manual Page 22 (60)
5.4.3 Communication objects for controlling the Philips Hue Bridge
The following communication objects are available for the connection of group addresses at the ise
smart connect KNX Hue:
Object
Name
Direction
Data width
DP type
Flags
(CRWTU)
1
Bridge connection status
Read
1 bit
1.002
CR-T-
Rubric:
Connections
Data type:
Boolean
Function:
Indicates whether a connection has been established with all configured
Philips Hue Bridges.
"Not connected" is displayed if no Philips Hue Bridge has been configured.
Description:
1 = Connected, 0 = Not connected.
Object
Name
Direction
Data width
DP type
Flags
(CRWTU)
2
All lights control
Write
1 bit
1.001
C-W--
Rubric:
Switching
Data type:
On/Off
Function:
Switches all connected lights on or off
Description:
1 = On, 0 = Off
1-bit object for switching all connected Hue lights on/off (max. 25).
Object
Name
Direction
Data width
DP type
Flags
(CRWTU)
3
System status
Read
1 byte
20.*
CR-T-
Rubric:
Error diagnosis
Data type:
Function:
Current system status or status for communication with the configured
Philips Hue Bridges
Description:
Possible status messages:
Code
Meaning
0
OK. No error
1
One or more Hue Bridges cannot be reached
Check whether the configured Philips Hue Bridges are switched on and
available in the network
4
Registration necessary on one or more Hue Bridges
Renew registration on the Philips Hue Bridge concerned (see 6.9 Regis-
tering the HueApp on one or more Philips Hue Bridge)
5
One or more Hue lights cannot be reached
If devices are switched off to save energy, this is not an error; in other
situations, check the configured lights on the Hue smartphone app.
6
The firmware is incompatible. Install an update
8
No Hue Bridge configured.
Configure at least one Philips Hue Bridge (see 6.9 Registering the Hue-
App on one or more Philips Hue Bridge)
