Section 2 Programming
2-9
Continuous Sampling Mode
The GLS can be placed in a Continuous
Sampling mode. In this mode, the GLS collects
samples without regard for the total number of
samples. Samples are collected until the Liquid
Detector senses a full bottle condition. (Sample
volumes should be greater than 50 ml for the
liquid detector to reliably sense this condition.)
The GLS then halts the sampling routine. To
enable the Continuous Sampling mode:
1. At the “TAKE XX SAMPLES” display, press
the Zero button.
2. Press the Enter button. The GLS is placed
in the Continuous Sampling mode and
advances to the next programming step.
2.4.5 Sample Volume
Enter the volume to collect at each sampling
event. This value must be within the range
shown on the GLS display.
To enter the sample volume:
1. Press the appropriate number buttons on
the keypad.
2. Press the Enter button to accept the new
value. The GLS loads the value into the
current program settings and advances to
the next step.
SAMPLE VOLUME
80 ml (10-930)
Содержание GLS
Страница 2: ......
