IS5 COMMUNICATIONS IES12G Скачать руководство пользователя страница 31

Страница: 31 / 177

iES12G

User’s

Manual

UM-iES12G-1.72.2-EN.docx

Pages 20 of 166

Label

Description

System Name

An administratively assigned name for the managed node. By convention,

this is the node's fully-qualified domain name. A domain name is a text string

consisting of alphabets (A-Z, a-z), digits (0-9), and minus sign (-). Space is not

allowed to be part of the name. The first character must be an alpha character.

And the first or last character must not be a minus sign. The allowed string length

is 0 to 255.

System Description

Description of the device

System Location

The physical location of the node (e.g., telephone closet, 3

floor). The

allowed string length is 0 to 255, and only ASCII characters from 32 to 126

are allowed.

System Contact

The textual identification of the contact person for this managed node,

together with information on how to contact this person. The allowed string

length is 0 to 255, and only ASCII characters from 32 to 126 are allowed.

System Time zone

offset (minutes)

Provides the time-zone offset from UTC/GMT.

The offset is given in minutes east of GMT. The valid range is from -720 to 720
minutes.

Save

Click to save changes.

Reset

Click to undo any changes made locally and revert to previously saved

values.

Banner

This page allows the user to configure the System Login Banner Title and System Banner Message. The

Banner appears when you are trying to access the device through WebUI or CLI.

Figure 16

–

System Banner Configuration

Содержание IES12G


















































































































































































Результаты поиска

Содержание IES12G

Отзывы:

Бренды по названию

Популярные бренды

IS5 COMMUNICATIONS IES12G, Руководство пользователя

Результаты поиска

Содержание IES12G

Отзывы:

Бренды по названию

Популярные бренды