12
Figure 4.
Ethernet Connector
Table 3.2
Ethernet Connector Pin Assignment
Contact
Signal
Direction
Purpose
1
ETX P
Router
→
PC
Transmission positive
2
ETX N
Router
→
PC
Transmission negative
3
ERX P
PC
→
Router
Reception positive
4
not used
–
–
5
not used
–
–
6
ERX N
PC
→
Router
Reception negative
7
not used
–
–
8
not used
–
–
SIM Interface
The SIM interface is designed to insert SIM-cards in the router. It is designed as a SIM card slot.
Prior to supplying power, insert a SIM card in the router. Proceed as follows:
Insert SIM card into the slot to click.
To extract the SIM card, press it to click and release.
Reset Button
The Reset button is designed to reset the device to factory settings. If the router's interface can not be
accessed due to incorrect settings or the password is forgotten, pres and hold the Reset button for 10 seconds
to restore the factory settings. The power indicator will blink green with a 1 second interval. If the Reset button
is held for just 5 seconds, the router will reboot without resetting.
