iRZ ion connect, Руководство пользователя

Страница: 43 / 50

43
Parameter Description
Filter by speed Enable/disable the filter of data by speed — setting new value for parameter re-
sponsible for enabling/disabling track point filtration by speed, when the speed
is less than the threshold.
If the parameter is set to 0, the filter is disabled. If the parameter is set for an
allowed interval (for example, 20 km/h), if the vehicle is moving with less than
20 km/h the device will filter said coordinates, considering that it is the margin
of error of the GPS/GLONASS positioning systems, on traffic lights and traffic
jams.
3.3.4. “Powersaving” Tab
The Powersaving tab is used for the configuration of the power saving modes.
The following configurations are available:
Parameter Description
Powersaving mode:
Enable transition to mode
Enable/disable the transition of the device to “Power saving mode”.
Parking time before transition Time of parking event in minutes, after which the device will switch to power-
saving mode.
Waking interval Time of waking of the device form the powersaving mode in minutes, after which
the device will go online to transfer the main data to the server.
Fig. 3.6.
“Powersaving” tab