IROX EBR808C, Инструкция по эксплуатации

Страница: 20 / 24

~P.20~
reliable. The user needs to change the batteries at once
E. Radio reception signal
Indicates the condition of DCF radio controlled time reception
F. Clock window
Display current time, calendar or alarm time
G. Indoor indicator
Indicates the indoor temperature is displayed
H. Indoor maximum/minimum indicator
Indicates the maximum/minimum indoor temperature is displayed
I. Outdoor remote sensor indicator
Indicates the current outdoor remote sensor signal received. It can display up to 3 different remote
sensors which is placed in 3 different places and within 75 meter distance from the main unit.
J. Auto scroll indicator
The animated rolling arrow icon is shown to indicate the auto scroll of 3 different remote channel.
K. Outdoor maximum/minimum indicator
Indicates the maximum/minimum outdoor temperature is displayed
L. Remote sensor battery low indicator
Appears when the batteries of the remote sensor are running dry and the temperature measured by
this sensor is no longer reliable. The user must change the batteries at once.
DESCRIPTION OF BUTTONS
1. [ LIGHT/SNOOZE] is contactless key sensing by an IR motion sensor
IR motion sensor is placed between the crystal and LCD display to detect a motion up to 3 inches
distance. When triggered, activate backlight for 16 seconds (24 seconds if with adaptor) or stop alarm
temperately for 5 minutes when alarm sounds;
2. [ Clock ]
Press once to toggle for clock, calendar & alarm display mode.
Press and hold 2 seconds to enter the setting of the display mode – Clock/Calendar/Alarm
3. [ ]
Press once to increase the setting in CLOCK, CALENDAR or ALARM setting mode
Press and hold 2 seconds to manually activate or deactivate the radio controlled function
4. [ ]
Press once to decrease the setting in CLOCK, CALENDAR or ALARM setting mode
Press once to arm or disarm the daily alarm under alarm display mode
5. [ Channel ]
Select among channel 1, 2, 3 or to enter auto scroll mode.
Press and hold 2 seconds to activate or deactivate the sensor searching mode
6. [ Memory ]
Toggle for max or min temperature memory reading for both IN & OUT thermometers
Press and hold 2s to clear individual memory when the Max or Min temperatures are displayed
7. [ unit ]
Toggle for setting temperature display unit °C or °F
Press & hold 2s to set the crystal weather icon illumination cycle
8. [ Reset ]
Press once to trigger system reset and restore all setting to factory default
Slide switch [BACKLIGHT] to select the backlight mode
(ENG)