Page 6 of 24
the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store the demolition hammer when it is not in use. Store it in a dry, secure place out of the reach
of children. Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Keep guards in place and in working order. Never operate the product without the guards in place.
Do not leave the tool running unattended.
Specific Operation Warnings
⚠
WARNING
To reduce the risk of injury, always wear eye protection
Wear ear protection when using the hammer. Exposure to noise can cause hearing loss.
Wear heavy duty anti-vibration gloves.
Be sure the bit is secured in place before operation.
Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
When drilling or screwing into walls, ceilings, etc., make sure beforehand that you will not damage
any hidden electric cables. During this work you should not touch any metal parts of the machine;
only touch the machine by the plastic housing.
Always be sure you have a firm footing.
Hold the hammer firmly with both hands.
Be sure no one is below you when using the tool in high locations.
Do not point the tool at anyone in the area when operating. The bit could fly out and seriously
injure someone.
Burn hazard. Do not touch the bit or parts close to the bit immediately after operation; they will be
extremely hot.
Grounding
⚠
WARNING
This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a
