Page 12 of 24
3. Slide the hand holder (1) to the main poles (2) and attach the side poles (3) to the clamp piece
(16).
Before Each Use
⚠
WARNING
Be sure the bit is secured in place before operation.
When drilling or screwing into walls, ceilings, etc., make sure beforehand that you will not damage
any hidden electric cables. During this work you should not touch any metal parts of the machine;
only touch the machine by the plastic housing.
Be sure no one is below you when using the hammer in high locations.
Always remove the plug from the power source before installing or removing a bit or accessory
from the chuck.
Operating Instructions
⚠
WARNING
To reduce the risk of injury, always wear eye protection
Wear ear protection when using the hammer. Exposure to noise can cause hearing loss.
Wear heavy duty anti-vibration gloves.
Be sure the bit is secured in place before operation.
Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Always be sure you have a firm footing.
Hold the hammer firmly with both hands.
