Ironton 58252, Руководство пользователя

Страница: 4 / 19

Page 4 of 19
Intended Use
The Ironton Air-Operated 1:1 Oil Pump can be used to transfer lubrication oil, waste oil, and antifreeze
liquids.
Packaging Contents
Part# Description Quantity
1701001 Air-operated pump 1
ET10000 Extension tube 1
Technical Specifications
Property Specification
Compression ratio 1:1
Operating pressure (psi) 70-115
Max. fluid pressure (psi) 115
Air consumption (min) @115psi/3.6CFM
Max. free flow rate (min) 4.8 gallon
Suction tube diameter 1-5/8''
Suction tube length (inch) 10-5/8''
Air inlet connection 1/4'' NPT female
Oil outlet connection Male 1/2''
Max. viscosity oil delivered SAE80
Temperature oil delivered -50-122°F
Noise level (dB) 82
Important Safety Information
⚠
WARNING

Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.