Page 11 of 14
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
The sharpener
does not work.
Cord not connected.
Check that cord is plugged in.
No power at outlet.
Check power at outlet. If outlet is not
powered, turn off sharpener and check
circuit breaker.
Internal damage or wear.
Have technician service.
Performance
decreases
over time.
Accessory dull or damaged.
Keep cutting accessories sharp.
Replace as needed.
Excessive noise
or rattling.
Internal damage or wear.
Have technician service sharpener.
Parts Diagram
