Ironton 50134, Руководство пользователя

Страница: 8 / 17

Page 8 of 17
Assembly
On first delivery, check that all parts are present. Compare the contents of the shipping carton with the
packing list. If any parts are missing or damaged, contact customer service for replacement parts (see
the Replacement Parts section in this manual for the phone number).
Before Each Use

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit.
Cluttered, wet, or dark work areas can result in injury. Using the tool in confined work areas may
put you dangerously close to other cutting tools and rotating parts.

Check for damaged parts before each use. Carefully check that the pump will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate
the pump with a damaged part.

Do not use the pump where there is a risk of causing a fire or an explosion; e.g., in the presence
of flammable liquids, gases, or dust. The tool can create sparks, which may ignite the dust or
fumes.

Keep children and bystanders away from the work area while operating the pump. Do not allow
children to handle the pump.

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your
work area. Some of these hazards may be below the work surface hidden from your view and
may cause personal harm or property damage if unintentionally contacted.