Ironman Fitness Power Tower, Руководство пользователя

Страница: 7 / 26

Warning
: It is highly recommend that you have assistance during the assembly of the IRONMAN
strength equipment.
1. Tools for assembly:
General tools you may needed for the assembly of the IRONMAN strength equipment.

Metric Allen Key Set

Metric Wrench Set and Adjustable Wrench

Flat Screwdrivers

Phillips Screwdrivers

Rubber Mallet

Silicone Spray Oil
2. Insert bolts into the frame as illustrated in the drawing of each of the steps.
3. Hand-tighten the bolts, nuts, and screw during assembly. Hand-tightening will allow for easily
aligning the parts during assembly. Tighten all the hardware once the entire unit has been
completely assembled.
4. It is highly recommended that a professional installer assembles the IRONMAN strength
equipment. But, with the proper assistance, the right tools, and strictly following the assembly
steps, and given enough time; the assembly of the unit can be achieved without professional
help.
5. Thoroughly read each step before proceeding to assemble the items of that step.
6. To aid in assembly of the equipment, the hardware pack (bolts, nuts, washer…etc.) have been
presorted according to their corresponding steps.
See Hardware Pack page.
7. When the equipment is fully assembled check all the functions for correct operation. Consult the
manual if you experience any issues, or for further help please contact our service department.
See page 2.
ASSEMBLY PREPARATION
5