IronCraft FMH Series, Руководство по эксплуатации, Страница: 35 / 48

FLAIL MOWER - FMH Series
6.2. GEARBOX LUBRICATION
Lubrificant: AGIP ROTRA MP SAE 85W/140 oil gear or equivalent
CAUTION
Before touching the gearbox wait until it has cooled sufficiently.
Check the oil level every 50 hours, making sure the level is aligned with the level plug (1).
To perform the check, it is necessary to remove the screws (2) holding the safety cover on the gearbox,
which prevents access to the plug.
2 1 3
5
4
If the oil level is below the line of the level plug, it’s necessary fill up oil till restore the correct level.
The oil change must be performed:
• after the first 50 working hours;
• each 500 working hours.
To make the oil change:
• unscrew the level plug (1);
• place a tank under the oil drain plugs (3) and (4);
• unscrew the oil drain plugs (3) and (4) and drain oil completely into the tank;
• retighten the drain plug (4);
• unscrew the oil filling plug (5) on the top of gearbox;
• fill up oil till the level reach the hole of the level plug (1);
• retighten level plug (1) and the filling plug (5);
• replace the safety cover retightening the screws (2);
• dispose the discharged oil into containers for used oil.
IMPORTANT
Frequently check possible oil leaks from the flail mower through visual inspection, and in case of
leakage provide immediately proper maintenance.
Avoid oil leaks on the ground when restoring oil level or making oil change.