IronCraft FMH Series Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 48

IronCraft FMH Series Скачать руководство пользователя страница 31

FLAIL MOWER - FMH Series

If the replacement of the set of belts is required:

• remove the safety cover of the belts by loosening the four bolts that secure it to the frame

• loosen the four nuts (1) under the gearbox which lock it to the frame;

• loosen the two bolts (2) fixing the extension tube to the side plate of the frame;

• loosen the lock nuts (4) and the tension nut (5) until the extraction of the belts from their seats on the

pulleys is permitted, starting from the external position (a)

• reinsert the new belts in succession contrary to what done for the disassembly.

• adjust the belt tension according to the indications done above

• retighten the two bolts (2) fixing the extension tube to the side plate of the frame;

• move the gearbox in order to restore the position of the extension tube perpendicular to the side plate

of the flail mower;

• retighten the four nuts (1) under the gearbox;

• reposition the safety cover in his original place.

a

«
...
29
30
31
32
33
...
»

Содержание FMH Series

















































Отзывы:

Нет отзывов