Copyright 2020 Iron Bow Technologies
30
Appendix 2
– Tethered Volume Control
For specific applications, the CLINiC can be wall mounted
at high level making it difficult to reach the Tactile
Membrane control panel. Generally, in these circumstances,
the system is set to auto-answer and the camera is controlled
from the remote location. The only local room user controls
that are required are Volume adjustments for which an
optional Tethered Remote Control is available.
The Tethered Remote Volume control has a volume up and
down button, which when pressed, raises or lowers the
volume until the button is released. A volume indicator bar
is displayed on the top right hand side of the screen showing
the volume level when either of the + or – keys are
being pressed.
Camera Reset Function
It is important to instruct cleaning staff to be very gentle
with the camera. Manually moving the pan and tilt will
cause a position detection error in the camera. The camera
will then be unresponsive and the Standby light will blink.
In this event, the user can use the Tethered Remote Volume
Control to reset the camera by selecting and holding both
the and Volume – buttons simultaneously for 5
seconds.
The camera will then go through a short reset routine and
resume normal pan/tilt operation.
Figure 17 – Tethered Remote Volume Control
